Metal 3D printing technology helps designers turn great ideas into reality. The materials include aluminum alloy, stainless steel, high-temperature alloy, titanium alloy, cobalt chromium alloy, mold steel, and high conductivity copper. The main technologies for metal 3D printing are SLS and SLM. Metrixal's main 3D printing business is SLM or DMLS, particularly for materials such as aluminum alloys, stainless steel, tool steel, and titanium alloys.
Ni base heat-resistant stainless steel (In718)
Chromium Bronze (QCr1)
Aluminium (AlSiMg)
Stainless steel (316L)
Mold steel (MS1)
Titanium alloy (TC4)
|
|
3D Printing Equipment - SLM280
Why do our clients choose Metrixal
List of Testing Equipment
Stainless steel (316L), aluminum alloy (AlSi Mg), titanium alloy (TC4), cobalt chromium alloy (MP1), mold steel (MS1), high-temperature alloy (IN718), high conductivity copper (QCr1)
Conventional production tolerance standards
0.02~0.05mm
Aluminum alloy
Aluminum is one of the most commonly used metals in mechanical processing due to its excellent strength to weight ratio, low cost, and recyclability.
Alloy:
AL5052-T651, AL6061-T651, AL 7075-T651, AL6082-T651...
Complete options:
A. Polishing, B. Grinding, C. Laser Carving, D. Sandblasting, E. Spray Painting, F. Coating, G. Anodizing, H. Hard Anodizing, I. Teflon Coating, J. Laser Marking, K. Silk Screen Printing, L. Silk Transfer Printing.
Brass is an easily machinable metal commonly used for various parts, including gears, lock components, fittings, and decorative applications.
Alloy:
Brass H59, Brass H62, Brass H59, Brass H62, Brass HA177-2, Brass HMn58-2, Brass HPB59-1, Brass HSn62-1
Complete options:
A. Polishing, B. Grinding, C. Brushing, D. Laser Marking, E. Screen Printing, F. Transfer Printing.
Brass
Stainless steel
Stainless steel is a high-strength alloy with high hardness, corrosion resistance, and rust resistance due to its chromium and carbon content.
Alloy:
201¡¢303¡¢304¡¢316¡¢410¡¢420¡¢17-4PH...
Complete options:
A. Polishing, B. Grinding, C. Vacuum Heat Treatment, D. Sandblasting, E. Spray Painting, F. Nitriding, G. Passivation, H. Galvanizing, J. Teflon, K. Titanium Coating, L. Laser Marking, M. Screen Printing, N. Transfer Printing.
Titanium alloy
Titanium alloy is a high-strength alloy with strong corrosion resistance and heat resistance, widely used in engine components, turbine blades, and medical equipment.
Alloy:
First grade, second grade, third grade, fourth grade, fifth grade
Complete options:
A. Polishing, B. Grinding, C. Brushing, D. Sandblasting, E. Laser Marking, F. Screen Printing, G. Transfer Printing.
Tool steel
Tool steel has high process properties such as hardness, strength, wear resistance, and sufficient toughness.
Alloy:
A2¡¢D2¡¢D3...
Complete options:
A. Polishing, B. Grinding, C. Nitriding, D. Sandblasting, E. Spray Painting, F. Radium Carving, H. Hard Anodizing, I. Passivation, J. Galvanizing, K. Chemical Nickel Plating, L. Chromium Plating, M. Blacking/Oxidation Black, O. Teflon, P. Titanium Coating, Q. PLC Coating, R. Laser Marking, S. Silk Screen Printing, T. Transfer Printing.
|
|
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||
Metal parts
Plastic parts
The main technologies for 3D printing are SLS and SLM.
SLS (Selective Laser Sintering). SLS technology refers to the use of selective laser irradiation on material powders to melt special additive materials. These special additive materials will serve as adhesives and enable the metal powder to bond and form the expected 3D model. Then the metal 3D printing was completed.
SLM (Selective Laser Melting). SLM technology means that selective laser will directly heat the metal powder until it is completely melted. After cooling, it will become the expected 3D model.
SLM printing uses selective laser melting technology to melt and solidify metal powder layer by layer until three-dimensional parts are formed. In this process, the ruler's construction chamber will lay a layer of metal powder, and the high-power laser selectively fuses the powder onto the bed by tracking the surface of the powder section. Then, a new coat of material is applied for the next layer. The entire process is carried out in a high vacuum chamber or a chamber filled with protective gas to prevent the metal powder from reacting with oxygen at high temperatures.
SLM is a high-energy, fine spot laser that can complete complex parts in a very short amount of time, whereas traditional methods can take weeks or even months to complete. The parts not only have precise dimensions, high tensile strength, and high density, but also excellent mechanical properties. Mainly used for rapid production of high-precision and high-quality metal parts.
