Aluminum alloy
Aluminum is one of the most commonly used metals in mechanical processing due to its excellent strength to weight ratio, low cost, and recyclability.
Alloy:
AL5052-T651, AL6061-T651, AL 7075-T651, AL6082-T651...
Complete options:
A. Polishing, B. Grinding, C. Laser Carving, D. Sandblasting, E. Spray Painting, F. Coating, G. Anodizing, H. Hard Anodizing, I. Teflon Coating, J. Laser Marking, K. Silk Screen Printing, L. Silk Transfer Printing.
Brass is an easily machinable metal commonly used for various parts, including gears, lock components, fittings, and decorative applications.
Alloy:
Brass H59, Brass H62, Brass H59, Brass H62, Brass HA177-2, Brass HMn58-2, Brass HPB59-1, Brass HSn62-1
Complete options:
A. Polishing, B. Grinding, C. Brushing, D. Laser Marking, E. Screen Printing, F. Transfer Printing.
Brass
Bronze
Bronze is a high-strength alloy with excellent wear resistance and corrosion resistance due to its content of tin, iron, and zinc. Usually, the tin content is between 3% and 14%.
Alloy:
QSn-6-6-3
Complete options:
A. Polishing, B. Grinding, C. Brushing, D. Laser Marking, E. Screen Printing, F. Transfer Printing.
Copper
Copper has excellent conductivity and thermal conductivity, and is widely used in electrical applications.
Alloy:
T1¡¢T2¡¢T3¡¢TU1¡¢TU2b
Complete options:
A. Polishing, B. Grinding, C. Brushing, D. Laser Marking, E. Screen Printing, F. Transfer Printing.
Stainless steel
Stainless steel is a high-strength alloy with high hardness, corrosion resistance, and rust resistance due to its chromium and carbon content.
Alloy:
201¡¢303¡¢304¡¢316¡¢410¡¢420¡¢17-4PH...
Complete options:
A. Polishing, B. Grinding, C. Vacuum Heat Treatment, D. Sandblasting, E. Spray Painting, F. Nitriding, G. Passivation, H. Galvanizing, J. Teflon, K. Titanium Coating, L. Laser Marking, M. Screen Printing, N. Transfer Printing.
|
|
|||||||||||||||||||||||||||||
Metal parts
Tolerance of normal production standards
Stamping raw materials
stamping die
stamping equipment
What is stamping?
Stamping is the processing of workpieces with the desired shape or size by applying external force to plates, strips, pipes, and profiles through a press and mold, causing them to undergo plastic deformation or separation. The main raw materials for stamping are hot-rolled and cold-rolled steel plates or strips.
stamping process
The mold used for stamping is called a stamping die, abbreviated as a punching die. A mold is a specialized tool for batch processing materials (metal or non-metal) into the required stamped parts. Stamping dies are crucial in stamping. If there are no molds that meet the requirements, mass stamping production will be difficult. Without advanced stamping molds, advanced stamping processes cannot be achieved. Stamping processing consists of stamping technology and molds, stamping equipment, and stamping materials. Only when all these elements work together can stamped parts be successfully produced.
Of all these steels in the world, 60% to 70% are steel plates, and the majority are stamped into finished products. The body, chassis, fuel tank, heat sink, boiler drum, container shell, motor, electrical iron core, silicon steel sheet, etc. are all made by stamping processing. There are also a large number of stamped parts in instruments, household appliances, bicycles, office machinery, and household appliances.
Stamping is an efficient production method. If composite molds or multi station progressive molds are used, multiple stamping processes (single station or multi station) can be completed on one press. Thus achieving fully automated production from strip unwinding, straightening, flattening, dropping to forming, and finishing. Stamping production has high efficiency, good working conditions, and low production costs. Generally speaking, stamping can produce hundreds of pieces per minute?
However, stamping processing also has some drawbacks.
(1) High noise and vibration;
(2) Molds require high precision, complex manufacturing, long cycles, and expensive manufacturing costs. So small-scale production is limited;
(3) If the precision requirements of the parts are too high, it is difficult for stamping production to meet the requirements.
